1723 – Surround2018-09-14T15:49:55+00:00

In starting with a statement product like the The 1723 Tower and 1723 Monitor, we set ourselves a challenge in designing a matching surround speaker, that could keep up with the capabilities of our front loudspeakers. Using the same 8” (Surround) and 6,5” (Surround S) mid-bass driver and waveguide tweeter on the front baffle as used throughout the 1723 Series, excellent tonal matching is assured as is pin-point imaging. To deliver an all-enveloping surround field and assist in peerless surround steering, we fitted custom built full-range dipolar drivers to the angled side baffles into our TriAxial speaker.

All our 1723 speakers are Certified by the very strict testing protocols of THX Ultra where each speaker must pass a set of 400 measurements. The THX Certification does not mean it is a dedicated home speaker, but rather a guarantee of tight consistency within well-established acoustic parameters. THX Certification is as much about music, as for movies.

The engineers at THX Labs utilize a proprietary scientific testing methodology to ensure the highest audio fidelity possible. All 1723 speakers passed the THX Ultra Certification without any change to the products, meaning our standards already exceed THX Ultra level out of the box!

GLOSS BLACK

GLOSS WHITE

MATTE BLACK

MATTE WHITE

Specs

Design TriAxial
Tweeter 28mm
Side drivers 2 x 4″
Woofer 8″
Enclosure Sealed
Enclosure material High Density Fiberboard (HDF)
Xover freq. 200Hz / 1400Hz
Sensitivity 87dB/2.83v/1m
Freq. response 58-20kHz (+/-3dB)
Impedance 4-ohm nominal
Included Manual. Rubber pads. Wall mounting bracket.
Dimensions 45H x 43.2W x 21.6D cm
Weight 17.4 kg
Break-in for optimal performance 50 hours
Recommended amplifier Up to 250W RMS @ 4ohm
Specs

Design TriAxial
Tweeter 28mm
Side drivers 2 x 4″
Woofer 6.5″
Enclosure Sealed
Enclosure material High Density Fiberboard (HDF)
Xover freq. 200Hz / 1500Hz
Sensitivity 84dB/2.83v/1m
Freq. response 59-20kHz (+/-3dB)
Impedance 4-ohm nominal
Included Manual. Rubber pads. Port plugs.
Dimensions 38.5H x 37.1W x 17.5D cm
Weight 13.7 kg
Break-in for optimal performance 50 hours
Recommended amplifier Up to 300W RMS @ 4ohm

PREMIUM
BUILD QUALITY

Higher density and naturally better damped than MDF (Medium Density Fiberboard), using HDF (High Density Fiberboard) results in a sonically inert cabinet. We use no plastic parts.

WAVEGUIDE
TWEETER

The heart of all Arendal speakers, our Tweeter utilizes a 28mm synthetic soft dome with custom designed, matching waveguide.

MASSIVE &
CLEAN BASS

The four (4) 8” woofers in the Tower and 6,5“ woofers in the Tower S are built upon the same core fundamentals as the the 13.8” subwoofer, but with application specific details changed.

ENGINEERING & DEVELOPMENT

How we do things

AWARDS & REVIEWS

Learn more about our products from happy customers and blown away magazines

Load More Posts

CROSSOVER
NETWORK

We took a look at what spikes actually do and then applied straight-forward, uncompromising engineering to deliver an effective, attractive solution that doesn’t cost the earth.

SPEAKER
INPUT POSTS

Chosen for its excellent conductivity, corrosion resistance and hardness; all serve to protect the copper material and music signal carried within.

10 YEAR
WARRANTY

Luckily for you and for us, Arendal Sound products are extremely durable products which have gone through extreme stress tests during development.

GRAPHS & DATA

All loudspeaker measurements are made in anechoic chamber, measured at 2.83v/1m. The subwoofers are measured at ground plane to get realistic frequency response, measured at 2.83v/1m.

HANDBOOK

Good night story of the year

Do you have a Arendal story to share?

Check out our Ambassador page